- Home /
- Support /
- Product Support /
- Strain Gauge Load Cell Amplifier Support /
- M-3200 LTR Strain Gauge Amplifier Support
M-3200 LTR Strain Gauge Amplifier Support
Downloads
- Datasheet - M-3200 LTR (424.7 KB)
- Manual & Calibration Instructions - M-3200 LTR (160.1 KB)
*for Drawings please visit the M-3200 LTR Product Page
Common Questions
What outputs are available on these amplifiers?
Can I use foil gauge load cells with this amplifier?
Will this allow me to monitor what the left load, and the right load cell is reading?
What outputs are available on these amplifiers?
0-10VDC, 0-100 microamps, 4-20mA.
Can I use foil gauge load cells with this amplifier?
No
Will this allow me to monitor what the left load, and the right load cell is reading?
Yes
Get the Most Out of Your M-3200 LTR
How do I calibrate this amplifier?
How do I test output?
How do I install this amplifier?
How do I change the Dipswitch?
How do I connect my load cells to the amplifier?
How do I calibrate the amplifier?
How do I calibrate this amplifier?
Consult the Calibration Instructions for the M3200 LTR.
How do I test output?
Use a digital multimeter capable of measuring 4-20 mA.
How do I install this amplifier?
It just snaps onto any standard 35mm Din Rail. Consult the Installation Instructions for the M3200 LTR for correct wiring.
How do I change the Dipswitch?
Carefully remove the side cover and use a small screwdriver to slide the switches. Consult the Installation Instructions for the M3200 LTR.
How do I connect my load cells to the amplifier?
Consult the Installation Instructions for the M3200 LTR
How do I calibrate the amplifier?
Consult the Installation Instructions for the M3200 LTR.
